Get A Quote

How Much Backlash Does a Spur Gear Need

How Much Backlash Does a Spur Gear Need

Table of Contents

    There is no single backlash value for a spur gear. One published reference lists the average backlash of stock spur gears at standard center distance, from 0.013 in at 3 diametral pitch down to 0.0025 in at 33 to 64 diametral pitch. The value you need depends on the duty, the center distance and the accuracy grade of the gears.

    What Backlash Is and Why Gears Need It

    Backlash is the amount by which a tooth space exceeds the thickness of the gear tooth engaged in mesh. It is a designed gap, not just a machining error. The gap lets the gears turn without grinding on both flanks at once. It also leaves room for a film of lubricating oil between the teeth and absorbs part of the manufacturing error that every cut gear carries.

    Types of Backlash

    Backlash is measured in different directions, and a drawing should say which one it means. The normal and circular values are linked by the pressure angle: normal backlash equals circular backlash times the cosine of the pressure angle.

    TypeWhat it isWhere it is used
    Circular (jt)Arc length on the pitch circle that one gear can turn while the other is heldInspection and assembly checks, because it is easy to measure
    Normal (jn)Shortest distance between the non-working flanksDesign, manufacturing and drawings
    Radial (jr)Clearance along the line between the gear centersCalculations only
    AngularCircular backlash expressed as an angleGiven as an angle when the backlash is expressed as a rotation

    How Much Backlash a Spur Gear Needs

    Engineers Edge lists the average backlash of stock spur gears mounted at the standard center distance, which is half the sum of the two pitch diameters. The values below are averages for stock gears in inches, not a limit for your design.

    Diametral pitch is the number of teeth per inch of pitch diameter; see our guide to diametral pitch vs pitch diameter for the formulas.

    Diametral pitchAverage backlash (in)
    30.013
    40.010
    50.008
    60.007
    70.006
    8 to 90.005
    10 to 130.004
    14 to 320.003
    33 to 640.0025

    Coarser teeth carry more backlash. The table covers inch gears from one source, so a metric gear or a custom gear is specified on its drawing instead.

    The duty moves the target. A gear maker's guide says light-load, low-speed and precision drives such as measuring instruments and CNC feed drives use a relatively small backlash. Heavy-duty, low-precision gears in agricultural machinery and loaders use a larger value, while ordinary machinery sits in between. A second gear maker adds that heavy equipment often needs a little more clearance for shock and load variation.

    What Too Little and Too Much Backlash Cause

    Too little backlash leads to the following problems:

    • Noise, overloading and overheating of the gears, up to seizing and failure
    • No room for an oil film between the teeth, which speeds up wear
    • Tight running after assembly when tooth thickness, center distance or temperature vary

    Too much backlash leads to a different set of problems:

    • Impact between the teeth during load changes, with vibration and noise
    • More flank wear and a shorter gear life
    • Lost motion in a reversing drive, because the output lags until the opposite flank makes contact

    Small backlash also costs more. Engineers Edge notes that it needs tighter tolerances on runout, pitch, profile and bearing location. In one-way drives backlash has almost no effect on accuracy, so it shows mainly in reversing drives. A noisy gear pair can also come from profile error, runout or center distance problems, so these are worth checking when a pair is noisy.

    How Backlash Is Set

    There are two basic ways to make backlash: enlarge the center distance or reduce the tooth thickness. A gear manufacturer's technical reference says the second is much more popular. A thinner tooth gives more backlash and a thicker tooth gives less.

    • Tooth thickness: the drawing gives limits on tooth thickness, which sets the backlash range.
    • Center distance: for two external gears, a larger center distance gives more backlash. For an external gear meshing with an internal gear, a larger center distance gives less.
    • Profile shift: positive shift thickens the tooth and reduces backlash; negative shift thins it and increases backlash.
    • Assembly adjustment: shims, eccentric sleeves and adjustable housings can tune backlash during assembly, but they also change tooth contact.
    • Anti-backlash gears: a gear split into two spring-loaded halves removes backlash and is generally used in light-load, low-speed drives.

    Worked Example: How Center Distance Changes Backlash

    Engineers Edge gives the relationship for 20° and 14½° pressure angle gears. For 20°, the change in center distance equals 1.374 times the change in backlash. For 14½°, it equals 1.933 times. It also says that for most applications it is acceptable to limit the increase over the nominal center distance to half the average backlash.

    Take a pair at 8 diametral pitch with 20° teeth. The table gives an average backlash of 0.005 in. The allowed center distance increase is 0.005 / 2 = 0.0025 in. The backlash change is 0.0025 / 1.374 = 0.0018 in, so the pair runs at about 0.0068 in. The same 0.0025 in increase on 14½° gears adds only 0.0025 / 1.933 = 0.0013 in.

    A center distance tolerance on a spur gear drawing is therefore a backlash tolerance. Treat the result as an estimate from one source, not a design value.

    How to Measure Backlash

    Three shop methods are common:

    • Feeler gauge: insert gauges into the gap between the non-working flanks until it is filled.
    • Lead wire: press lead wire between the flanks and measure the thinnest part of the flattened wire.
    • Dial indicator: hold one gear, rock the other, and read the maximum movement at a tooth flank.

    What to Put on the Gear Drawing

    A common request for quotation mistake is to give module, tooth count and material and leave backlash undefined. A controlled gear drive needs more:

    • The backlash target or the tooth thickness limits, with the direction it is measured in
    • The measuring method and the acceptable range
    • The nominal center distance and its tolerance
    • The accuracy grade, such as ISO, DIN or AGMA
    • Whether the drive reverses, and the load and speed
    • Heat treatment, because distortion after hardening changes tooth geometry
    • How the gears are assembled: fixed center distance, shims or an adjustable housing

    Conclusion

    A spur gear needs backlash, and the right amount comes from the duty, the center distance and the accuracy grade. Stock gears average 0.013 in at 3 diametral pitch and 0.0025 in at 33 to 64, but a drawing sets the value for your drive. Too little risks noise, heat and seizing, while too much gives impact and lost motion when the drive reverses. Center distance and tooth thickness are the two levers.

    Profab Machine makes stainless steel gears to your drawing. Send the backlash target, the measuring method, the center distance and tolerance, and the accuracy grade with the request.

    For the choice of tooth form, see our guide to helical gears versus spur gears.

    Sources:

    Ray Wang

    Ray Wang

    Ray Wang is an engineer at Profab Machine with more than 20 years of experience in stainless steel applications and automotive parts. Over the years, he has built deep expertise in precision machining, material behavior, and practical engineering solutions. His hands-on background and strong focus on quality help ensure every project meets demanding performance and reliability standards.