
Custom studded rod ends in 316L, 304, and 17-4PH, with other grades on request. The ball carries a threaded stud in place of a bore, so no separate bolt is needed. Female or male housing thread, right or left hand, metric and inch, made to your drawing or sample.
Applications: Hydraulic and Pneumatic Linkages, Steering and Tie Rods, Automation and Linkage Assemblies, Agricultural Machinery.
A studded rod end is named by its thread. These are the common metric coarse threads for the stud and the housing. Ball size, housing size, and stud length differ between makers, so they are set on your drawing, with inch threads and male housings too. Pitches follow the ISO metric coarse series. Send the mounting hole size and the bracket thickness with the thread.
| Thread | Pitch | Hand | Ball, Housing, Stud Length |
|---|---|---|---|
| M6 | 1.0 mm | RH and LH | To your drawing |
| M8 | 1.25 mm | RH and LH | To your drawing |
| M10 | 1.5 mm | RH and LH | To your drawing |
| M12 | 1.75 mm | RH and LH | To your drawing |
A stud rod end is mounted through a hole, so name the hole size and the bracket thickness with the stud thread.
| Form | Shape | Typical Use |
|---|---|---|
| Female housing | An internal thread in the housing takes a bolt or threaded rod | Links where the rod end screws onto a male thread |
| Male housing | An external thread on the housing screws into a tube or tapped hole | Links where the rod end screws into a female thread |
| Stud with hex | A hex on the stud lets a wrench tighten it | Mounting points with limited access |
| Left and right hand set | One rod end of each hand | Links that adjust length by turning the body |
| Custom studded rod end | Stud, housing, thread, and stud length to drawing | Brackets and links that a standard rod end does not fit |
Send a drawing, a DXF file, or a sample. Our engineers review the dimensions and the tolerance before cutting metal, and we CNC machine the part ourselves, so you deal directly with the factory.
We machine the stud and the housing threads ourselves, so the thread hand and pitch match your drawing and repeat orders match the approved part.
Salt, moisture, washdown chemicals, and load drive the choice between 316L, 304, and 17-4PH. We confirm the grade against your drawing before production, and tiered pricing is available on larger orders.












A studded rod end has a threaded stud on the ball in place of a bore. The stud goes through the mounting hole and is locked with a nut, so no separate bolt is needed.
Choose a studded rod end where a bolt is hard to fit or the stack height must be short. Choose a standard rod end where the ball must be fixed with a bolt and spacers.
Choose 316L where the rod end sees salt, chlorides, or chloride-based cleaning chemicals, because it resists pitting better than 304. Choose 304 for indoor, dry, or mildly humid service, where it costs less.
Yes. Left hand and right hand sets are made in metric and inch threads, so a link can adjust by turning its body.
A quote request needs the stud thread and hand, the housing thread and type, the stud length, the grade, and the quantity. A drawing or a sample speeds it up.
If you already have drawings, email them to [email protected].
[email protected] ↗We use cookies to run this site, to measure how it is used, and to show relevant ads. You can accept all, reject all non-essential cookies, or choose by category. Privacy Policy