Get A Quote
Stainless steel weld-in bung with a rod end
Rod End Accessories / Weld-In Bungs

Stainless Steel Weld-In Bungs

Custom weld-in bungs in 304, 316L, and 17-4PH, with other grades on request. Threaded tube adapters that give a tube end the internal thread of a rod end, left or right hand, made to your tube outside diameter and wall, to your drawing or sample.

Applications: Fabricated Suspension Links, Steering and Tie Rods, Hydraulic and Pneumatic Cylinder Linkages, Agricultural Machinery.

  • 304 / 316L / 17-4PH
  • Left or right hand, metric and inch
  • To your tube OD and wall
  • Stepped or straight, weld-prep chamfer
View Specifications
Technical Reference

Specifications

A bung is made to the tube it is welded into, so the tube outside diameter and wall decide the bore left for the bung. These combinations are common on rod end link kits. Any tube and thread is made to your drawing. Tube ID is the outside diameter less two walls. Left and right hand bungs, shoulder, and length are set on your drawing.

Tube ODWallTube IDBung Thread
1.000 in0.095 in0.810 in1/2-20
1.000 in0.120 in0.760 in1/2-20
1.250 in0.095 in1.060 in5/8-18
1.250 in0.120 in1.010 in5/8-18
1.500 in0.120 in1.260 in3/4-16
1.500 in0.250 in1.000 in3/4-16
Why Profab

Your Weld-In Bung Supplier

  1. 01

    Made to Your Drawing or Sample

    Send a drawing, a DXF file, or a sample. Our engineers review the dimensions and the tolerance before cutting metal, and we CNC machine the part ourselves, so you deal directly with the factory.

  2. 02

    Fit Made to Your Tube

    We turn each bung to your tube outside diameter and wall, with the thread cut on the same part, so the body seats square and the thread runs true.

  3. 03

    Grade Matched to the Tube

    Tube material, salt, moisture, and washdown chemicals drive the choice between 304, 316L, and 17-4PH. We confirm the grade against your drawing before production, and tiered pricing is available on larger orders.

Customers

Brands We Work With

  • Grainger logo
  • Siemens logo
  • King logo
  • Caterpillar logo
  • ZPMC logo
  • Timken logo
  • ARB logo
  • Bobcat logo
  • Club Car logo
  • Fox logo
  • John Deere logo
  • Tesla logo
FAQ

Common Questions

What is a weld-in bung?

A weld-in bung is a short threaded plug welded into the end of a tube so the tube can take a rod end. It is also called a tube adapter or a threaded tube insert.

How do I choose the bung size?

Match the thread of the rod end shank and the hand, then choose the bung for the tube outside diameter and wall. The same outside diameter in a different wall needs a different bung.

Can I weld with the rod end screwed in?

It is better not to. Weld heat and spatter can damage the thread or the rod end, so weld the bung in empty and run a tap through the thread afterward.

Should I choose 304 or 316L stainless steel bungs?

Choose 316L where the bung sees salt, chlorides, or chloride-based cleaning chemicals, because it resists pitting better than 304. Choose 304 for indoor, dry, or mildly humid service, where it costs less.

What should I send to quote weld-in bungs?

A quote request needs the thread size and hand, the tube outside diameter and wall, whether a shoulder is needed, the length, the grade, and the quantity. A drawing or a sample speeds it up.

Get in touch with

Ready to Order Stainless Steel Weld-In Bungs?

If you already have drawings, email them to [email protected].

[email protected] ↗
Request a Quote