
Custom jam nuts in 304, 316L, and 17-4PH, with other grades on request. Thin hex nuts that lock a rod end on its shank, in right and left hand fine threads and metric and inch sizes, made to your drawing or sample.
Applications: Hydraulic and Pneumatic Linkages, Steering and Tie Rods, Automation and Linkage Assemblies, Agricultural Machinery.
Thin hex nuts, about half the height of a regular nut. These are the common metric coarse sizes and the common inch size for a 1/2 inch rod end. Right and left hand, fine threads, and other sizes are made to your drawing. Metric sizes follow ISO 4035. Inch fine threads such as 5/8-18 and 3/4-16 are made to your drawing.
| Thread | Pitch | Across Flats (max) | Thickness (max) |
|---|---|---|---|
| 1/2-20 | 20 threads per inch | 3/4 in | 5/16 in |
| M5 | 0.8 mm | 8 mm | 2.7 mm |
| M6 | 1.0 mm | 10 mm | 3.2 mm |
| M8 | 1.25 mm | 13 mm | 4 mm |
| M10 | 1.5 mm | 17 mm | 5 mm |
| M12 | 1.75 mm | 19 mm | 6 mm |
| M16 | 2.0 mm | 24 mm | 8 mm |
A left hand nut is often marked, so the hands are not mixed up. Say on the drawing if you want a groove or a marking.
| Form | Shape | Typical Use |
|---|---|---|
| Right hand jam nut | A thin hex nut with a right hand thread | Standard rod ends and studs |
| Left hand jam nut | A thin hex nut with a left hand thread | Left hand rod ends and the left hand end of an adjuster |
| Fine thread jam nut | A fine pitch such as 5/8-18 or 3/4-16 | Inch rod end shanks |
| Metric jam nut | A metric thread in the pitch of the rod end | Metric rod ends |
| Custom jam nut | Thread, height, flats, and grade to drawing | Shanks and studs that a standard nut does not fit |
Send a drawing, a DXF file, or a sample. Our engineers review the dimensions and the tolerance before cutting metal, and we CNC machine the part ourselves, so you deal directly with the factory.
We cut the thread to match the shank, in right and left hand, so the nut seats square and runs on without binding.
Salt, moisture, washdown chemicals, and heat drive the choice between 304, 316L, and 17-4PH. We confirm the grade against your drawing before production, and tiered pricing is available on larger orders.












A jam nut is a thin hex nut, about half the height of a regular nut. It is tightened against a rod end or a body to lock its position on a thread.
Yes, if the rod end has a left hand thread. The nut must be the same hand as the thread it runs on.
Choose 316L where the nut sees salt, chlorides, or chloride-based cleaning chemicals, because it resists pitting better than 304. Choose 304 for indoor, dry, or mildly humid service, where it costs less.
Stainless on stainless can seize if it is run on fast and dry. Use a thread lubricant and run the nut on slowly.
A quote request needs the thread size, pitch, and hand, the height, the across-flats size, the grade, and the quantity. A drawing or a sample speeds it up.
If you already have drawings, email them to [email protected].
[email protected] ↗We use cookies to run this site, to measure how it is used, and to show relevant ads. You can accept all, reject all non-essential cookies, or choose by category. Privacy Policy