
Custom uniball cups in 304, 316L, and 17-4PH, with other grades on request. Weld-in housings that hold a spherical bearing in a fixed position, with a snap ring groove to retain it, made to your bearing bore and your drawing or sample.
Applications: Fabricated Suspension Links, Steering Linkages, Hydraulic and Pneumatic Cylinder Mounts, Agricultural Machinery.
A cup is named by the bearing bore it holds. Outside diameter and height differ between makers, so only one common size is shown, and any other bore, outside diameter, and height is made to your drawing, with the ring groove cut to match the snap ring. Snap rings are matched to the cup series, so order the ring with the cup. Say whether you want a hone allowance or a press-fit bore.
| Bearing Bore | Cup Outside Dia | Cup Height | Bore Finish |
|---|---|---|---|
| 1 in | 2-5/8 in | 1-1/2 in | Hone allowance or press fit |
| Other bores | To your drawing | To your drawing | Hone allowance or press fit |
Order the snap ring with the cup, because rings differ by cup series and a ring for one series may not fit another.
| Form | Shape | Typical Use |
|---|---|---|
| Snap ring cup | A cup with an internal groove for a retaining ring | Links where the bearing must be held and replaced |
| Hone allowance cup | A bore left a little undersize for honing after the weld | Welded links where the bore is finished after the weld |
| Press-fit cup | A bore held to a tight tolerance | Cups where the bearing is pressed in |
| Cup and spacer kit | A cup with the bearing, ring, and spacers for a bolt size | Fabricated links and brackets |
| Custom cup | Bore, outside diameter, height, and groove to drawing | Bearings and brackets that a standard cup does not fit |
Send a drawing, a DXF file, or a sample. Our engineers review the dimensions and the tolerance before cutting metal, and we CNC machine the part ourselves, so you deal directly with the factory.
We turn the bore and the ring groove on the same part, so the bearing seats square and the ring locks.
Salt, moisture, washdown chemicals, and load drive the choice between 304, 316L, and 17-4PH. We confirm the grade against your drawing before production, and tiered pricing is available on larger orders.












A uniball cup is a weld-in housing that holds a spherical bearing in a fixed position. It usually has a groove for a snap ring that retains the bearing.
Choose the cup for the bearing bore and outside diameter, and match the snap ring to the cup. Then check the cup outside diameter and height against the bracket.
It can. Weld heat can pull the bore out of round, so the bore is either left a little undersize and honed after welding, or held to a tight tolerance for a press fit.
Choose 316L where the cup sees salt, chlorides, or chloride-based cleaning chemicals, because it resists pitting better than 304. Choose 304 for indoor, dry, or mildly humid service, where it costs less.
A quote request needs the bearing bore and outside diameter, the cup outside diameter and height, how the bearing is retained, the grade, and the quantity. A drawing or a sample speeds it up.
If you already have drawings, email them to [email protected].
[email protected] ↗We use cookies to run this site, to measure how it is used, and to show relevant ads. You can accept all, reject all non-essential cookies, or choose by category. Privacy Policy