
Custom linkage adjusters in 316L and 17-4PH, with other grades on request. Turnbuckle-style bodies with a right hand thread at one end and a left hand thread at the other, so turning the body sets the length between two rod ends, made to your drawing or sample.
Applications: Hydraulic and Pneumatic Linkages, Steering and Tie Rods, Automation and Linkage Assemblies, Agricultural Machinery.
An adjuster has a right hand thread at one end and a left hand thread at the other. These are common thread sizes, with the jam nut wrench size that locks each end. Body length and hex size are made to your drawing. Jam nut sizes follow ISO 4035 for metric threads. Other threads, such as 5/8-18 and 3/4-16, are made to your drawing.
| End Thread | Pitch | Hand | Jam Nut Across Flats |
|---|---|---|---|
| 1/2-20 | 20 threads per inch | RH and LH | 3/4 in |
| M6 | 1.0 mm | RH and LH | 10 mm |
| M8 | 1.25 mm | RH and LH | 13 mm |
| M10 | 1.5 mm | RH and LH | 17 mm |
| M12 | 1.75 mm | RH and LH | 19 mm |
| M16 | 2.0 mm | RH and LH | 24 mm |
Use a jam nut on each rod end shank to lock the setting. A turnbuckle-style body alone can turn under vibration.
| Form | Shape | Typical Use |
|---|---|---|
| Hex body adjuster | A hex bar bored and tapped from both ends, one hand each end | Links that need a wrench to set the length |
| Round body adjuster | A round body with wrench flats | Compact links where a full hex does not fit |
| Long adjuster | A longer body for a wider range of adjustment | Links that need a large range of length |
| Locked adjuster | A body with a jam nut on each rod end shank | Links that must hold their length under vibration |
| Custom adjuster | Threads, hex, length, and marking to drawing | Rod ends and links that a standard body does not fit |
Send a drawing, a DXF file, or a sample. Our engineers review the dimensions and the tolerance before cutting metal, and we CNC machine the part ourselves, so you deal directly with the factory.
We machine the body from solid bar and cut both threads on the same part, so there is no welded nut and no weld seam to corrode.
Salt, moisture, washdown chemicals, and load drive the choice between 316L and 17-4PH. We confirm the grade against your drawing before production, and tiered pricing is available on larger orders.












A linkage adjuster is a turnbuckle-style body with a right hand thread at one end and a left hand thread at the other. It sits between two rod ends, and turning it changes the length of the link.
Both change length by turning a body with opposite hand threads. A turnbuckle is usually a rigging part with hook, eye, or jaw ends that holds tension. A linkage adjuster takes rod ends and sets the length of a link in a mechanism.
Fit a jam nut on each rod end shank and tighten it against the body after the length is set.
Choose 316L where the link sees salt, chlorides, or chloride-based cleaning chemicals. Choose 17-4PH where the load is heavy and the setting is dry or mildly humid.
A quote request needs the thread size and hand at each end, the length, the hex size, the grade, the finish, and the quantity. A drawing or a sample speeds it up.
If you already have drawings, email them to [email protected].
[email protected] ↗We use cookies to run this site, to measure how it is used, and to show relevant ads. You can accept all, reject all non-essential cookies, or choose by category. Privacy Policy