
A flange mounted ball transfer unit has a flange around its housing. The flange bolts to the surface through fixing holes, so the unit sits fixed on a table or a base. The load ball rides on smaller support balls, so a load moves in any direction with little effort.
Profab Machine makes flange mounted units to your drawing, with the ball diameter, the flange, and the load you specify. The flange can be round, oval, or square, with two, three, or four fixing holes. The housing and the load ball are stainless steel in 304 or 316L. Other grades are available on request.
Applications: Ball transfer tables, conveyors, packing and assembly stations, sheet handling, machine feeds, and air cargo ground handling.
Say how many fixing holes your base has and how far apart they are. Give the ball diameter and the load for the unit.
| Flange Style | Fixing Holes | Typical Use |
|---|---|---|
| Round flange | Two or three holes spaced around the flange | Tables and workstations with a round seating hole |
| Oval flange | Two holes | Narrow bases where a round flange does not fit |
| Square flange | Two or four holes | Plates and frames fixed with four bolts |
| Custom flange | Shape, size, and hole pattern to drawing | Bases that a standard flange does not fit |
The load rule and the spacing rule are published by ball transfer unit makers. Your drawing sets the final count and spacing.
| Item | What to Know | Rule |
|---|---|---|
| Load rating | Set by the ball size, the housing, and the ball material | Stated for your unit, to your drawing |
| Seating hole | The body passes through a round hole and the flange rests on the surface | Give the hole diameter and the base thickness |
| Load per unit | Only about three units carry a load, because of tolerances in the load base | Divide the weight of the load by 3 |
| Spacing | Units placed too far apart let the load tip between them | No more than the shortest edge of the load divided by 2.5 |
| Working direction | Ratings depend on the unit and on how it is mounted | Give the working direction with the inquiry |
Send a drawing, a DXF file, or a sample. Our engineers review the dimensions and the tolerance before cutting metal. We CNC machine the part ourselves, so you deal directly with the factory.
You set the flange shape, the hole pattern, the ball diameter, and the load. We check the housing and the ball material against that load. The rating is then stated for your unit, not copied from a catalog.
Salt, moisture, washdown chemicals, and load drive the choice between 304, 316L, and 17-4PH. We confirm the grade against your drawing before production. Tiered pricing is available on larger orders.












A flange mounted ball transfer unit has a flange around its housing. The flange bolts to the surface through fixing holes, so the unit stays fixed while the load rolls over the ball.
Choose a flange when the base takes bolts from above and you want the unit fixed on the surface. Choose a stud when the base takes a tapped hole. Choose a drop-in unit when it must sit level in a drilled hole.
Flanges with two, three, and four holes are all in use. Give the hole count and the spacing on your drawing. We make the flange to match.
Divide the weight of the load by 3 to find the rating each unit needs. Space the units no more than the shortest edge of the load divided by 2.5. Check the base of the load as well, because its size and condition matter.
Choose 316L where the unit sees salt, chlorides, or chloride-based cleaning chemicals, because it resists pitting better than 304. Choose 304 for indoor, dry, or mildly humid service, where it costs less.
Send the ball diameter, the load per unit, and the flange shape with its hole count. Add the grade and the quantity. A drawing or a sample speeds up the quote.
If you already have drawings, email them to [email protected].
[email protected] ↗We use cookies to run this site, to measure how it is used, and to show relevant ads. You can accept all, reject all non-essential cookies, or choose by category. Privacy Policy