
CS ball joints are metric angled ball joints, DIN 71802 compatible, with a spring-steel safety clip that holds the ball in the socket. The socket has an internal thread and the stud an external thread, and a sealing cap is available for dust protection. Body and socket are 304 or 316 stainless steel with a 440C ball stud. Sizes run from M5 to M16, in right-hand or left-hand thread.
Applications: Steering and control linkages, pedal and lever connections on vehicles and utility machines, and metric machinery where a retained joint is needed. Specify the clip where vibration or reverse load could pull the joint apart.

All dimensions are in millimeters, with a tolerance of 0.3 mm on L, L1, l1, and l2. d1 on the stud side is the ball diameter, and the angle is the total swivel angle (18 degrees each side). Load ratings depend on the material, so send your load and application with the quote request.
| Part No. | D1 Socket Thread | D2 Stud Thread | d1 Ball Dia. | L | L1 | l1 | l2 | D | a° Angle |
|---|---|---|---|---|---|---|---|---|---|
| CSM5 | M5X0.8 | M5X0.8 | 8 | 22 | 10.2 | 10.2 | 9 | 8 | 36 |
| CSM6 | M6X1.0 | M6X1.0 | 10 | 25 | 11.5 | 12.5 | 11 | 10 | 36 |
| CSM8 | M8X1.25 | M8X1.25 | 13 | 30 | 14.0 | 16.5 | 13 | 13 | 36 |
| CSM10 | M10X1.5 | M10X1.5 | 16 | 35 | 15.5 | 20.0 | 16 | 16 | 36 |
| CSM12 | M12X1.75 | M12X1.75 | 16 | 35 | 15.5 | 20.0 | 16 | 16 | 36 |
| CSM14 | M14X1.5 | M14X1.5 | 22 | 45 | 21.5 | 28.0 | 22 | 19 | 36 |
| CSM14x2.0 | M14X2.0 | M14X2.0 | 22 | 45 | 21.5 | 28.0 | 22 | 19 | 36 |
| CSM16 | M16X1.75 | M16X1.75 | 22 | 45 | 21.5 | 28.0 | 22 | 19 | 36 |
We CNC machine your ball joint parts ourselves, so you deal directly with the factory. Tiered pricing is available on larger orders.
We specialize in small-batch orders and custom threads, studs, and materials, so the joint fits your linkage without secondary machining.
Parts are inspected against your drawing, and an ISO 9001 certified quality system sits behind every order.












DIN 71802 is the German standard for angled ball joints. The joint has a ball stud and a ball socket, and a CS ball joint is compatible with the standard layout. Name the ball size and the threads on your order and we match them.
Specify the clip where vibration, shock, or reverse load could pull the ball out of the socket. The clip raises the retention force. It also limits the swivel angle, so check that the motion of your linkage still fits.
The standard range is M5, M6, M8, M10, M12, M14, and M16 threads, in right-hand or left-hand thread, and M14 comes in a 1.5 mm or 2.0 mm pitch. Other sizes can be quoted from your drawing.
Body and socket are 304 or 316 stainless steel with a 440C ball stud, and 316L or 17-4PH are available. Choose 316L for salt and chemical washdown and 17-4PH for high load or high cycle count.
Yes. Mark the thread size and length on your drawing and we quote the change. Custom finishing can be quoted the same way.
If you already have drawings, email them to [email protected].
[email protected] ↗We use cookies to run this site, to measure how it is used, and to show relevant ads. You can accept all, reject all non-essential cookies, or choose by category. Privacy Policy