
ES ball joints have a staked socket with a rubber grommet around the ball stud, so the joint stays closed and the rubber keeps dust and moisture off the ball. Body and socket are 304 or 316 stainless steel with a 440C ball stud. Seven inch thread sizes run from 10-32 to 5/8-18, in right-hand or left-hand thread.
Applications: Linkages used outdoors, on boats, or in dusty places, and fixed links that are not disconnected in service. 316L is the usual grade for marine and washdown service.

All dimensions are in inches. D1 is the internal thread of the socket and D2 the external thread of the stud. Left-hand thread is available. Load ratings depend on the material, so send your load and application with the quote request.
| Part No. | D1 Socket Thread | D2 Stud Thread | L | G | F | P | N | C |
|---|---|---|---|---|---|---|---|---|
| ES187 | 10-32-2B | 10-32-2A | 0.375 | 0.438 | 0.438 | 0.438 | 0.875 | 1.063 |
| ES250 | 1/4-28-2B | 1/4-28-2A | 0.438 | 0.563 | 0.469 | 0.500 | 0.969 | 1.219 |
| ES312 | 5/16-24-2B | 5/16-24-2A | 0.500 | 0.688 | 0.531 | 0.563 | 1.125 | 1.406 |
| ES375 | 3/8-24-2B | 3/8-24-2A | 0.625 | 0.875 | 0.688 | 0.750 | 1.375 | 1.688 |
| ES438 | 7/16-20-2B | 7/16-20-2A | 0.750 | 1.125 | 0.875 | 1.000 | 1.938 | 2.375 |
| ES500 | 1/2-20-2B | 1/2-20-2A | 0.750 | 1.125 | 0.875 | 1.000 | 1.938 | 2.375 |
| ES625 | 5/8-18-2B | 5/8-18-2A | 0.875 | 1.125 | 1.000 | 1.000 | 2.063 | 2.578 |
We CNC machine your ball joint parts ourselves, so you deal directly with the factory. Tiered pricing is available on larger orders.
We specialize in small-batch orders and custom threads, studs, and materials, so the joint fits your linkage without secondary machining.
Parts are inspected against your drawing, and an ISO 9001 certified quality system sits behind every order.












The grommet closes the opening around the ball stud, so dust and moisture stay away from the ball and the socket. This is why ES is the series to look at for outdoor, marine, and dusty linkages.
The socket is closed around the ball by staking, so the joint is a fixed assembly. It does not snap apart by hand, so choose QD or QI when the link must be disconnected often.
The standard range is 10-32, 1/4-28, 5/16-24, 3/8-24, 7/16-20, 1/2-20, and 5/8-18, in right-hand or left-hand thread. Other threads can be quoted from your drawing.
Body and socket are 304 or 316 stainless steel with a 440C ball stud, and 316L or 17-4PH are available. Choose 316L for salt and chemical washdown and 17-4PH for high load or high cycle count.
Yes. Mark the thread size and length on your drawing and we quote the change. Custom finishing can be quoted the same way.
If you already have drawings, email them to [email protected].
[email protected] ↗We use cookies to run this site, to measure how it is used, and to show relevant ads. You can accept all, reject all non-essential cookies, or choose by category. Privacy Policy