
QD ball joints use a spring so the socket snaps onto the ball stud and comes off again by hand, and a linkage disconnects and reconnects without tools. Body and socket are 304 or 316 stainless steel with a 440C ball stud, and the spring is stainless steel. Five inch thread sizes run from 10-32 to 1/2-20, in right-hand or left-hand thread.
Applications: Throttle and shift linkages, operator controls, agricultural and industrial equipment, and any linkage that is unhooked often for adjustment or service. 17-4PH is available for high-cycle, high-load links.

All dimensions are in inches. D1 is the internal thread of the socket and D2 the external thread of the stud. Left-hand thread is available. Load ratings depend on the material, so send your load and application with the quote request.
| Part No. | D1 Socket Thread | D2 Stud Thread | A | C | F | G | J Hex | L | M | N | P |
|---|---|---|---|---|---|---|---|---|---|---|---|
| QD187 | 10-32-2B | 10-32-2A | 0.125 | 0.063 | 0.438 | 0.438 | 0.313 | 0.438 | 1.094 | 0.906 | 0.438 |
| QD250 | 1/4-28-2B | 1/4-28-2A | 0.125 | 0.063 | 0.469 | 0.562 | 0.375 | 0.562 | 1.250 | 0.969 | 0.531 |
| QD315 | 5/16-24-2B | 5/16-24-2A | 0.156 | 0.094 | 0.531 | 0.687 | 0.437 | 0.625 | 1.453 | 1.125 | 0.605 |
| QD375 | 3/8-24-2B | 3/8-24-2A | 0.187 | 0.094 | 0.687 | 0.875 | 0.500 | 0.750 | 1.750 | 1.375 | 0.812 |
| QD500 | 1/2-20-2B | 1/2-20-2A | 0.250 | 0.094 | 0.875 | 1.125 | 0.625 | 1.000 | 2.530 | 2.030 | 1.000 |
We CNC machine your ball joint parts ourselves, so you deal directly with the factory. Tiered pricing is available on larger orders.
We specialize in small-batch orders and custom threads, studs, and materials, so the joint fits your linkage without secondary machining.
Parts are inspected against your drawing, and an ISO 9001 certified quality system sits behind every order.












A spring holds the socket on the ball stud. You pull the socket off the ball by hand and snap it back on, so the link comes apart and goes back together without tools.
Choose QD when the link is disconnected often, for example a quick-change linkage between runs or a control that is taken apart for service. If the link is never unhooked, a fixed series such as ES is the simpler choice.
The standard range is 10-32, 1/4-28, 5/16-24, 3/8-24, and 1/2-20, in right-hand or left-hand thread. Other threads can be quoted from your drawing.
Body and socket are 304 or 316 stainless steel with a 440C ball stud, and 316L or 17-4PH are available. Choose 316L for salt and chemical washdown and 17-4PH for high load or high cycle count.
Yes. Mark the thread size and length on your drawing and we quote the change. Custom finishing can be quoted the same way.
If you already have drawings, email them to [email protected].
[email protected] ↗We use cookies to run this site, to measure how it is used, and to show relevant ads. You can accept all, reject all non-essential cookies, or choose by category. Privacy Policy