
Profab Machine makes stainless steel washers to your drawing or to a named standard. We make flat, fender, spring lock, and special washers, stamped or machined to your outside diameter, inside diameter, and thickness, in metric and inch sizes, in 304, 316L, and 17-4PH, with other grades on request.
Applications: Machine frames and guards, marine hardware, food processing equipment, outdoor structures, and electrical enclosures. Name the standard on the order, for example ISO 7089 or DIN 125.
Flat washer sizes by bolt size, normal series. Fender, spring, and special washers, and any other inside diameter, outside diameter, or thickness, are made to your drawing. Sizes follow DIN 125 and ISO 7089. Inch washers, other thicknesses, and stamped or machined washers are made to your drawing.
| Bolt Size | Inside Dia (min) | Outside Dia (max) | Thickness |
|---|---|---|---|
| M3 | 3.2 mm | 7 mm | 0.45 to 0.55 mm |
| M4 | 4.3 mm | 9 mm | 0.7 to 0.9 mm |
| M5 | 5.3 mm | 10 mm | 0.9 to 1.1 mm |
| M6 | 6.4 mm | 12 mm | 1.4 to 1.8 mm |
| M8 | 8.4 mm | 16 mm | 1.4 to 1.8 mm |
| M10 | 10.5 mm | 20 mm | 1.8 to 2.2 mm |
| M12 | 13 mm | 24 mm | 2.3 to 2.7 mm |
| M16 | 17 mm | 30 mm | 2.7 to 3.3 mm |
The outside diameter and the thickness differ between standards, so name the standard on the order.
| Type | Standard Reference | Typical Use |
|---|---|---|
| Flat washer | ISO 7089 or DIN 125 A | Spreading fastener load and protecting the surface |
| Fender washer | DIN 9021 (larger outside diameter) | Soft materials, slotted or oversized holes, thin panels |
| Spring lock washer | DIN 127 B | Joints that vibrate or move |
| Machined washer | Made to drawing | Special thickness, tight tolerance, or a shape that stamping cannot give |
| Special washer | Made to drawing | Stepped, flanged, notched, or cross-drilled washers |
We CNC machine your washers ourselves, so you deal directly with the factory. Tiered pricing is available on larger orders.
We stamp thin washers and CNC machine thicker or tighter ones, so you get the process that suits the thickness and the tolerance.
Salt, moisture, washdown chemicals, and load drive the choice between 304, 316L, and 17-4PH. We confirm the grade against your drawing before production.












A fender washer has a larger outside diameter than a flat washer of the same bolt size. It spreads the load over a larger area, so it suits soft materials, thin panels, and oversized holes.
Use a lock washer when vibration or movement could loosen the joint. A flat washer does not resist loosening, and a stainless spring washer is less springy than a carbon steel one, so check the spec if spring force matters.
The outside diameter and the thickness differ between standards such as ISO 7089, DIN 125, and DIN 9021. A plain size can be quoted as any of them, and naming the standard avoids the wrong washer.
Choose 316L where the washer sees salt, chlorides, or chloride-based cleaning chemicals, because it resists pitting better than 304. Choose 304 for indoor, dry, or mildly humid service, where it costs less.
A quote request needs the standard or the inside diameter, outside diameter, and thickness, the type, the grade, the finish, and the quantity. A drawing or a sample speeds it up.
If you already have drawings, email them to [email protected].
[email protected] ↗We use cookies to run this site, to measure how it is used, and to show relevant ads. You can accept all, reject all non-essential cookies, or choose by category. Privacy Policy