
A rotating CIP spray ball turns on the flow of the cleaning fluid. Fan jets sweep a swirling pattern across the tank wall, and the same fluid flushes the bearing, so the bearing needs no separate lubricant.
Profab Machine makes each rotating spray ball for tank cleaning to your drawing. You set the ball size, the connection, the orifice pattern, and the grade. Choose 304 or 316L stainless steel to suit the cleaning chemistry.
A rotating ball suits heavier soil and tanks with agitators, baffles, or sensors that leave shadow areas for a fixed pattern. It needs enough pump flow and pressure to turn.
Applications: CIP tank cleaning in dairy, brewery, beverage, pharmaceutical, and chemical plants.
The pressure range is the one makers publish for rotating spray heads. Flow rate, coverage radius, and rotation speed depend on the model and on your pump, so send your rated flow, pressure, and tank size.
| Item | Typical |
|---|---|
| Connection | Tri-Clamp, NPT threaded, BSP, DIN 11851, socket-weld |
| Coverage | Full 360° continuous sweep |
| Operating pressure | About 2 to 3 bar (29 to 44 psi) |
| Bearing | Stainless, lubricated by the cleaning fluid |
| Material | 316L stainless steel (standard) |
| Item | What to Give on the Order |
|---|---|
| Ball and body | Ball diameter and overall length |
| Connection | Type and size, with the tank port diameter |
| Orifices | The tank size and the obstructions, or your own orifice drawing |
| Pump | Rated flow and pressure at the spray ball inlet |
| Finish | Surface roughness, with electropolishing or passivation if needed |
Send a drawing, a STEP or DXF file, or a sample. Our engineers review the dimensions and the tolerance before cutting metal. We CNC machine the part ourselves, so you deal directly with the factory.
You set the ball size, the connection, and the orifice pattern. We CNC machine the parts to that drawing, so the ball fits your tank port and your cleaning routine.
A rotating ball turns only when the pump gives it enough flow and pressure. Send the rated flow and pressure at the inlet, and we match the orifices to them.












A rotating CIP spray ball is a tank cleaning head that turns on the flow of the cleaning fluid. Fan jets sweep the tank wall in a swirling pattern.
A rotating ball sweeps the whole tank as it turns. A ball with no moving parts sprays a fixed pattern and has no bearing to wear.
Makers publish about 2 to 3 bar for rotating spray heads. Send your pump's rated flow and pressure, and we match the orifices to them.
Low flow or low pressure is the usual cause. Particles can also lock the bearing, so a screen at the inlet helps.
Choose 316L for caustic, acid, and chlorinated cleaning chemicals. Choose 304 for fresh water and dry use.
Send the tank size and the obstructions inside it, the connection type and size, and your pump flow and pressure. Add the grade and the quantity. A drawing or a sample speeds up the quote.
If you already have drawings, email them to [email protected].
[email protected] ↗We use cookies to run this site, to measure how it is used, and to show relevant ads. You can accept all, reject all non-essential cookies, or choose by category. Privacy Policy