
A spring loaded latch pin slides in a box bracket and is pushed into a strike hole by a spring. Pull the ring to draw the pin back and release the door or panel. The spring returns the pin when you let go.
Profab Machine makes each latch pin to your drawing or sample. You set the pin diameter, the pin length, and the bracket size. Choose 304 or 316L stainless steel to suit the environment.
Applications: Doors, compartments, gates, and panels on trailers and truck bodies, and marine hatches.
Common trailer and door latch pins are about 12 mm (1/2 in) in diameter. Pin length, bracket size, and spring force differ between makers. Give them on the order.
| Part | What It Does | What to Give on the Order |
|---|---|---|
| Pin | Slides into the strike hole to hold the door or panel shut | Pin diameter and pin length |
| Box bracket | Holds the pin and the spring, and mounts to the door or frame | Bracket length, width, and hole pattern |
| Spring | Returns the pin to the closed position | Spring force to your drawing |
| Pull ring | Draws the pin back by hand | Ring style and size |
| Strike | The hole or plate that takes the pin | Hole size and plate thickness |
Send a drawing, a DXF file, or a sample. Our engineers review the dimensions and the tolerance before cutting metal. We CNC machine the part ourselves, so you deal directly with the factory.
You set the pin diameter, the pin length, and the bracket size. We CNC machine the parts to that drawing. The pin then lines up with your strike hole.
Zinc plating is a sacrificial coating that wears away outdoors. For trailers, marine air, or washdown, stainless steel is the safer choice. 316L resists salt best. We confirm the grade against your drawing.












A spring loaded latch pin slides in a box bracket and is pushed into a strike hole by a spring. You pull a ring or a handle to draw it back.
A spring plunger is a threaded body with a nose that seats in a fixed hole. A latch pin slides in a bracket that is bolted or welded to the door.
Many spring latches have a notch that holds the pin in the open position. Tell us on your drawing if you need this feature.
A retainer such as a cotter pin can hold the pin in its bracket. Tell us the vibration and the load the latch sees. We will quote a suitable build.
Choose 316L where the latch sees salt, chlorides, or chloride-based cleaning chemicals. Choose 304 for dry or mildly humid use.
Send the pin diameter and length, the bracket size, and the mounting hole pattern. Add the grade, the finish, and the quantity. A drawing or a sample speeds up the quote.
If you already have drawings, email them to [email protected].
[email protected] ↗We use cookies to run this site, to measure how it is used, and to show relevant ads. You can accept all, reject all non-essential cookies, or choose by category. Privacy Policy